Getting started / Program firmware / calibration
Install SXTune, choose the correct ECU, connect, and follow the full firmware/calibration programming procedures.
SXTune 2.90Delta ECU range
Setup, calibrate and understand your Delta ECU
Practical SXTune operating guides, ECU setup and calibration procedures, plus ECU hardware photographs and connector pin-outs.
Documentation set. Application instructions use the SXTune interface and screenshots. ECU-specific hardware information is kept separately in the ECU Technical Reference.
Start here
Using SXTune
Main interface, Map Editor, toolbars, menus, Gauges, Scopes, logging and virtual channels.
ECU Setup / Calibration & Control
ECU setup procedures and engine calibration/control topics, each with a single dedicated guide.
Frequently used guides
ECU technical reference
Delta 400
ECU photograph and connector pin-out.
Delta 700
ECU photograph and connector pin-out.
Delta 800
ECU photograph and connector pin-out.
Delta 880
ECU photograph and connector pin-out.
Delta 900
ECU photograph and connector pin-out.
Delta GDI4
ECU photograph and connector pin-out.
Delta GDI6
ECU photograph and connector pin-out.
High-use setup & service guides
Program firmware / calibration
Normal programming, recovery and PDM calibration loading.
Install & connect
Power, CAN interface, LEDs and connection recovery.
Wiring & hardware
ECU pinouts, CAN, sensors and low-side outputs.